"Make Trail Maintenance Fun Again"
Trailblazer -HD
Overhanging Limb and Brush Cutter
for ATV’s, SXS’S, Tractors & Skid Steers
Make Trail Maintenance Fun Again
Trailblazer -HD
Overhanging Limb and Brush Cutter
for ATV’s, SXS’S, & Tractors
TRAILBLAZER – US PAT. D795,307 S & US 9,807,928 B1
TRAILBLAZER-HD
TRAILBLAZER – ATV
• CENTRIFUGAL CLUTCH ALLOWS UNIT TO BE STARTED AT IDLE WITHOUT BLADES TURNING.
• ALL MOTOR CONTROLS ARE WITHIN REACH WHILE SEATED ON ATV.
• HOURMETER FOR TRACKING HOURS TO PROPERLY MAINTAIN ENGINE.
• TACHOMETER TO SET THE BLADE RPM’S AT THE OPTIMAL CUTTING SPEED.
• (5) 13″ DIA. BLADES PROVIDING A CUTTING ZONE FROM 18″ TO 84″ DEPENDING ON RACK MOUNT HEIGHT. BLADES ARE BELT DRIVEN ALLOWING SLIPPAGE WHEN BLADES ARE BOUND UP OR STALLED.
TRAILBLAZER – hd
• CENTRIFUGAL CLUTCH ALLOWS UNIT TO BE STARTED AT IDLE WITHOUT BLADES TURNING.
• HD UNITS HAVE LARGER SHAFTS AND BEARINGS FOR MORE DURABILITY.
• HOURMETER FOR TRACKING HOURS TO PROPERLY MAINTAIN ENGINE.
• TACHOMETER TO SET THE BLADE RPM’S AT THE OPTIMAL CUTTING SPEED.
• (5) 13″ DIA. BLADES PROVIDING A 60" CUTTING ZONE. BLADES ARE BELT DRIVEN ALLOWING SLIPPAGE WHEN BLADES ARE BOUND UP OR STALLED.
• QUICK ATTACH PLATES OFFERED :
STANDARD SKID STEER
JOHN DEERE GLOBAL EURO
JOHN DEERE HOOK & PIN
TRAILBLAZER – HYD
• 7 GPM HYDRAULIC FLOW REQUIREMENT ON 13" DIA. (5-BLADE) SAWS.
•10 GPM HYDRAULIC FLOW REQUIREMENT ON 18" DIA. (3-BLADE) SAWS.
• HD UNITS HAVE LARGER SHAFTS AND BEARINGS FOR MORE DURABILITY.
• PHOTO SENSOR TACHOMETER TO SET THE BLADE RPM’S AT THE OPTIMAL CUTTING SPEED.
• (5) 13″ DIA. BLADES PROVIDING A 60" CUTTING ZONE. BLADES ARE BELT DRIVEN ALLOWING SLIPPAGE WHEN BLADES ARE BOUND UP OR STALLED.
• (3) 18″ DIA. BLADES PROVIDING A 54" CUTTING ZONE. BLADES ARE BELT DRIVEN ALLOWING SLIPPAGE WHEN BLADES ARE BOUND UP OR STALLED.
• QUICK ATTACH PLATES OFFERED :
STANDARD SKID STEER
JOHN DEERE GLOBAL EURO
JOHN DEERE HOOK & PIN
Pricing
TRAILBLAZER (ATV & SXS Versions:)
- $2,750.00 – ATV – 5 Blade Unit
- $3,200.00 – SXS – 6 Blade Unit less Custom Bumper Mount
- $3,450.00 – SXS – 6 Blade Unit w/Custom Bumper Mount
- $3,600.00 – SXS – 6 Blade Unit w/Electric Start Option Added to Above SXS Unit
IT IS NOT RECOMMENDED TO USE THE ATV-VERSION OR THE SXS VERSION ON A TRACTOR. THE FRAME, ENGINE, BEARINGS AND SHAFTS ARE SMALLER TO HELP MAKE THE UNIT LIGHT ENOUGH TO NOT OVERLOAD THE ATV OR SXS.
ATV ARE PRICED KOHLER Command Pro Engines. eStart Units only come with KOHLER Command Pro Engines.
TRAILBLAZER-HD – 5 Blade (Gas Engine TRACTOR / SKID STEER Versions:)
- $3,450.00 – TRAILBLAZER-HD, TBHD(LH)-FSM-18 – 5-Blade Unit w/Fork Lift Skid Mount (Left Hand Mount) includes Canopy Brush Guard over engine. p/n: TBHD(LH)-FSM- 18, Unit has a 18″ Blade offset from leftmost fork position.
- $3,450.00 – TRAILBLAZER-HD, TBHD(RH)-FSM-18, 5-Blade Unit w/Fork Lift Skid Mount (Right Hand Mount) this unit does not require a Canopy Brush Guard by design. p/n: TBHD(RH)-FSM-18, Unit has a 18″ Blade offset from Rightmost fork position.
- $3,700.00 TRAILBLAZER-HD (RH or LH), 5-Blade Unit w/ a Fixed Skid Steer Quick Attach Plate (standard blade offset is 44″-45″ from centerline of tractor or skid steer but can be reduced if needed.) Add $200 for a JD Hook & Pin Plate in lieu of Skid Steer Plate.
- $3,900.00 TRAILBLAZER-HD(RH)-SSM-36-45, 5-Blade Unit w/ a NEW Adjustable Skid Steer Quick Attach Plate (New Design allows you to manually adjust blade offset from 36″-45″ from centerline of tractor or skid steer.) Add $200 for a JD Hook & Pin Plate in lieu of Skid Steer Plate. Also has a storage shelf for chainsaws and fuel.
- $4,375.00 – TRAILBLAZER-HD(RH)-SSM-44-60-H, 5-Blade Unit mounted on a Skid Steer Type Mount. Blades are mounted on a slide mount that is hydraulically adjustable from 44-60″ centerline of quick attach plate/tractor. Add $200 for a JD Hook & Pin Plate in lieu of Skid Steer Plate. Deduct $200 for removing the hydraulic cylinder allowing for only manual adjustment. Also has a storage shelf for chainsaws and fuel. Note: having the slide cylinder will require a hydraulic function on your tractor to slide.
TRAILBLAZER-HYD-13- 5-Blade (Hydraulic Version for TRACTORS & SKID STEERS):
- $4,800.00 – TRAILBLAZER-HYD(RH)-13-SSM-44-60ROT-H, 5-Blade Unit mounted on a Skid Steer Type Mount with Manual Rotation Plate allowing the cut head to be manually rotated from vertical to horizontal and almost any angle in between. Blades are mounted on a slide mount that is hydraulically adjustable from 44-60″ centerline of quick attach plate/tractor. Add $200 for a JD Hook & Pin Plate in lieu of Skid Steer Plate. Deduct $200 for removing the hydraulic cylinder allowing for only manual adjustment. Note: having the slide cylinder will require an extra function on your tractor to cut and slide.
- Note: all of the 13″ Diameter Blades- 5-blade saws require 7 GPM continuous flow minimum to operate. Approximate 60″ cutting window. Rated to cut 2.5-3″ diameter limbs.
TRAILBLAZER-HYD-18 – 3-Blade (Hydraulic Version for TRACTORS & SKID STEERS):
- $5,400.00 – TRAILBLAZER-HYD(RH)-18-SSM-44-60ROT-H, 3-Blade Unit mounted on a Skid Steer Type Mount with Manual Rotation Plate allowing the cut head to be manually rotated from vertical to horizontal and almost any angle in between. Blades are mounted on a slide mount that is hydraulically adjustable from 44-60″ centerline of quick attach plate/tractor. Add $200 for a JD Hook & Pin Plate in lieu of Skid Steer Plate. Deduct $200 for removing the hydraulic cylinder allowing for only manual adjustment. Note: having the slide cylinder will require an extra function on your tractor to cut and slide.
- Note: all of the 18″ Diameter Blades- 3-blade saws require 10 GPM continuous flow minimum to operate. Approximate 54″ cutting window. Rated to cut 4.5-5″ diameter limbs.
CUSTOM BUILD options are available upon request.
Please contact directly for custom build pricing. Note for all purchases:
- TAXES MUST BE CHARGED FOR IN ARKANSAS (IN-STATE) PURCHASES
- UNITS ARE ALWAYS IN PRODUCTION AND ARE BUILT BASED ON A BUILD LIST OF CUSTOMERS. TYPICAL LEAD TIME IS 2-3 WEEKS (SOME UNITS ARE IN STOCK FOR IMMEDIATE SHIPMENT) ONCE ADDED TO THE LIST. IF YOU THINK YOU MIGHT WANT A UNIT PLEASE ASK TO BE PUT ON THE LIST. NO OBLIGATION TO BE ADDED, NO MONEY DOWN REQUIRED. I WILL CONTACT YOU WHEN A UNIT IS AVAILABLE TO YOUR BUILD GROUP TO FINALIZE YOUR DESIGN AND YOU CAN CANCEL AT ANY TIME. CUSTOM BUILDS RARELY TAKE MORE THAN 6 WEEKS TO COMPLETE.
- NOTE: OUT OF STATE BUYERS ARE RESPONSIBLE FOR THEIR OWN USE/SALES TAX
- FREIGHT RATES VARY DEPENDING ON SHIPPING LOCATION AND THE ACTUAL WEIGHT OF YOUR UNIT AND WILL BE QUOTED BASED ON A BUSINESS ADDRESS IN YOUR AREA PRIOR TO COMPLETING ORDER. STOUT DESIGNS ALLOWS YOU TO ARRANGE FREIGHT PRIOR TO SHIPMENT. PRODUCT WEIGHS 225-950 LBS DEPENDING ON VERSION. PALLETIZED ON A STANDARD 40″ wide X 48″ to 72″ long PALLET X 72″ – 78″ HIGH
We'd Love To Hear From You
contact us
Mailing Address
2710 Oak Tree Cove.
Benton, AR 72103
Shipping Address
10909 Otter Creek East Blvd.
Mabelvale, AR 72103
Get In touch
Ph: 501-258-0585
Joe.Stout@HSC-LR.com
Hours
Mon- Fri: 8am- 5pm
send a message
About Joe Stout
I’ve always enjoyed the outdoors, whether it was riding motorcycles, atvs or hunting. Being a mechanical engineer and designing automation equipment for over 30 years, I felt I could develop a product to make maintaining my personal trails, roads and pathways less burdensome allowing for more fun/hunting time. Seeing the huge time savings this machine granted, I pursued improving and testing this product thoroughly in 2017 along with waiting to start advertising this product until I secured both my design and utility patents in late 2017. I’m very confident it is a robust design when used as advertised. My main focus initially was to go after those of us in the market who need a robust trail cutter that do not have access to a tractor or need to cut where a tractor is too large or too heavy to enter the area. However, I quickly realized the need to cut higher limbs and the tractor mounted TRAILBLAZER-HD was launched in 2018 as well. I really feel when you get a chance to use this product you will be impressed with its performance. – Joe Stout